Factory Default Configuration - NETGEAR DGN2200M - Wireless-N 300 Router User Manual

N300 Wireless ADSL2+ Modem Router DGN2200M Mobile Edition User Manual

Factory Default Configuration

You can use the Restore Factory Settings button on the bottom panel of your router to restore
factory default settings. Press this button for 6 seconds. Your router will return to the factory
configuration settings shown in the following table.
Table 17. Factory Default Settings
Feature
Router Login User login URL
User name (case-sensitive)
Login password (case-sensitive)
Internet WAN MAC address
connection
WAN MTU size
Port speed
Local network LAN IP
(LAN)
Subnet mask
RIP direction
RIP version
RIP authentication
DHCP server
Local network DHCP starting IP address
(LAN) continued
DHCP ending IP address
DMZ
Time zone
Time zone adjusted for daylight
savings time
SNMP
Firewall Inbound (communications coming
in from the Internet)
Outbound (communications going
out to the Internet)
Source MAC filtering
Default Behavior
http://www.routerlogin.com
admin
password
Use default address
1492
Autosensing
192.168.0.1
255.255.255.0
None
Disabled
None
Enabled
192.168.0.2
192.168.0.254
Enabled or disabled
GMT for WW except NA and GR, GMT+1 for GR, GMT-8
for NA
Disabled
Disabled
Disabled (except traffic on port 80, the HTTP port)
Enabled (all)
Disabled
Appendix A. Technical Specifications and Factory Default Settings | 111