Manually Configuring Your Wireless Settings - NETGEAR DGN2200M - Wireless-N 300 Router User Manual

eavesdropper. This data encryption mode has been superseded by WPA-PSK and
WPA2-PSK.
• WPA-802.1x, WPA2-802.1x. Wi-Fi Protected Access (WPA) with user authentication
implemented using IEE 802.1x and RADIUS servers.
• WPA-PSK (TKIP), WPA2-PSK (AES). Wi-Fi Protected Access (WPA) using a pre-shared
key to perform authentication and generate the initial data encryption keys. The very
strong authentication along with dynamic per frame re-keying of WPA makes it virtually
impossible to compromise.
For more information about wireless technology, click the link to the online document in
Wireless Networking Basics

Manually Configuring Your Wireless Settings

Note: If you use a wireless computer to change the wireless network name
(SSID) or wireless security, you will be disconnected when you click
Apply. To avoid this problem, connect your computer to the router
with an Ethernet cable while you are making changes.
To view or manually configure the wireless settings:
1. Log in to the wireless modem router as described in
Modem Router
2. Select Wireless Settings from the main menu:
The settings for this screen are explained in
30 | Chapter 2. Wireless Network Configuration
N300 Wireless ADSL2+ Modem Router DGN2200M Mobile Edition User Manual
in Appendix C.
on page 17.
Logging In to Your Wireless-N
Table 5.