Specification
Interface Specifications
LAN
WAN
USB
Factory Default Configuration
You can use the Restore Factory Settings button on the rear panel of the modem router to return its
configuration to the factory settings. This is called a hard reset. To perform a hard reset, press and
hold the Restore Factory Settings button until the LEDs flash. Your modem router retarts and
returns to the factory configuration settings shown in the following table.
Feature
Login
Modem Router user login URL
User name (case-sensitive)
Login password (case-sensitive)
ReadyShare Access
Internet Connection
WAN MAC address
WAN MTU size
Port speed
Local Network (LAN)
LAN IP
Subnet mask
RIP direction
RIP version
RIP authentication
DHCP server
DHCP starting IP address
Technical Specifications
RangeMax Wireless-N DSL Gigabit Modem Router DGN3500 User Manual
Description
10BASE-T or 100BASE-Tx, RJ-45
ADSL, Dual RJ-11, pins 2 and 3
T1.413, G.DMT, G.Lite
?
v1.0, November 2009
Default Behavior
http://www.routerlongin.com
admin
password
\\readyshare
Use default address
1500
Autosensing
192.168.0.1
255.255.255.0
None
Disabled
None
Enabled
192.168.0.2
A-2