Wps Pin Entry - NETGEAR DGN2200M - Wireless-N 300 Router User Manual

4. Go to the client wireless computer, and run a WPS configuration utility. Follow the utility's
instructions to click a WPS button.
5. Go back to the wireless modem router screen to check for a message.
The wireless modem router WPS screen displays a message confirming that the client
was added to the wireless network. The wireless modem router generates an SSID, and
implements WPA/WPA2 wireless security. The wireless modem router keeps these
wireless settings unless you change them, or you clear the Keep Existing Wireless
Settings check box in the WPS Settings screen.
6. Note the new SSID and WPA/WPA2 password for the wireless network. You can view these
settings in the Wireless Settings screen. See
on page 30.
To access the Internet from any computer connected to your wireless modem router, launch
a browser such as Microsoft Internet Explorer or Mozilla Firefox. You should see the wireless
modem router's Internet LED blink, indicating communication to the ISP.
Note: If no WPS-capable client devices are located during the 2-minute
time frame, the SSID does not change, and no security is
implemented on the wireless modem router.

WPS PIN Entry

Any wireless computer or device that will connect to the wireless modem router wirelessly is
a client. The client must support a WPS PIN, and must have a WPS configuration utility, such
as the NETGEAR Smart Wizard or Atheros Jumpstart.
The first time you add a WPS client, make sure that the Keep Existing Wireless Settings
check box on the WPS Settings screen is cleared. This is the default setting for the wireless
modem router, and allows it to generate the SSID and WPA/WPA2 security settings when it
implements WPS. After WPS is implemented, the wireless modem router automatically
selects this check box so that your SSID and wireless security settings stay the same if other
WPS devices are added later.
To use a PIN to add a WPS client:
1. Log in to the wireless modem router as described in
Modem Router
36 | Chapter 2. Wireless Network Configuration
N300 Wireless ADSL2+ Modem Router DGN2200M Mobile Edition User Manual
on page 17.
Manually Configuring Your Wireless Settings
Logging In to Your Wireless-N