Basic Isp Settings - NETGEAR DGN2200M - Wireless-N 300 Router User Manual

Table 2. Broadband Settings Fields
Fields and Check Boxes
Internet Connection Mode
Failover Detection Method
1
Retry Interval is
1
Failover after
1
Resume after
Enable Hardware link detection
1. This field is available only when the Internet Connection Mode is Use Ethernet first and if fail use 3G
mobile connection.

Basic ISP Settings

To view or configure the basic settings:
1. Select Basic Settings from the router menu.
2. Select Yes or No depending on whether your ISP requires a login. This selection changes
the fields available on the Basic Settings screen.
22 | Chapter 1. Internet Configuration
N300 Wireless ADSL2+ Modem Router DGN2200M Mobile Edition User Manual
Description
The choices are:
• Use ADSL first and if fail use Mobile Broadband connection
• Always use Mobile Broadband connection
• Always use ADSL connection
1
Select the failover method and enter the related information:
• DNS lookup using WAN DNS Server
• Perform a DNS lookup by a hostname
• Ping this IP address
Enter the retry interval.
Enter how many retry attempts to make before failing over.
Enter how long to wait for primary link is stabilized before resuming to
use the primary link.
Enter when to failover when the Ethernet link is dropped. This is
independent of the DNS / Ping detection methods.