Installation Guide for the NETGEAR 54 Mbps Wireless PC Card WG511
•
Highest level of data encryption using128-bit Shared Key WEP data encryption method.
Lower level of data encryption or no data encryption is available to simplify your network
setup or to improve data transfer rate.
The following Netgear products can be configured to communicate with the WG511 Wireless PC
Card.
•
WG602 54 Mbps Wireless Access Point
•
WGR614 Wireless Cable/DSL Router
•
WAB102 Dual Band Access Point
•
WAB501 Dual Band PC Card
•
MA101 802.11b Wireless USB Adapter
•
ME102 802.11b Wireless Access Point
•
MA311 802.11b Wireless PCI Adapter
•
MR314 and MR814 802.11b Wireless Cable/DSL Routers
•
MA701 802.11b Wireless Compact Flash Card
What's in the Box?
The product package should contain the following items:
•
NETGEAR 54 Mbps Wireless PC Card WG511
•
Installation Guide for the NETGEAR 54 Mbps Wireless PC Card WG511
•
NETGEAR 54 Mbps Wireless PC Card WG511 Resource CD, including:
— Driver and Configuration Utility Software
— Installation Guide for the NETGEAR 54 Mbps Wireless PC Card WG511
•
Warranty card
•
Support information card
If any of the parts are incorrect, missing, or damaged, contact your NETGEAR dealer. Keep the
carton, including the original packing materials, in case you need to return the product for repair.
The NETGEAR 54 Mbps Wireless PC Card WG511 has two interfaces. The PCMCIA Type II
connector connects to any notebook PC with an available PCMCIA or CardBus slot. The wireless
interface of the NETGEAR 54 Mbps Wireless PC Card WG511 remains outside of the notebook
PC chassis when the wireless PC card is inserted into a notebook. The green LED indicates the
wireless link condition of the NETGEAR 54 Mbps Wireless PC Card WG511 with another
wireless node or the associated access point.
1-2
Introduction