Table of Contents
Advertisement
Verify wireless connectivity to your network.
Open the WG511 utility by clicking on the icon
a.
Click the Status tab page. Verify that your Connection and Status Monitor information
b.
matches your wireless network.
Check the two WG511 LEDs:
c.
•
Solid green for the LINK LED indicates a good connection. Blinking for the LINK
LED indicates attempting to connect. Off for the LINK LED indicates the card is
turned off or not fully plugged in.
•
Blinking for the amber transmission LED indicates data transmission.
Verify connectivity to the Internet or network resources.
d.
Note: If you are unable to connect, see
Basic Setup
Installation Guide for the NETGEAR 54 Mbps Wireless PC Card WG511
"Basic Troubleshooting Tips" on page
in the Windows system tray.
Note: You can use the Site Survey
to verify the availability of wireless
networks and their SSIDs.
For more on information, please
see
"Understanding the
Configuration Options" on page
3-21.
2-20.
2-17
Advertisement
Table of Contents
