Table of Contents
Advertisement
Installation Guide for the NETGEAR 54 Mbps Wireless PC Card WG511
For example, if you use your notebook PC to connect to a wireless network in an office
and a wireless network in your home, you can create a profile for each wireless network.
Then, you can easily load the profile that has all the configuration settings you need to join
the network you are using at the time.
There are two types of wireless network connections you can configure:
•
Infrastructure Mode -- uses the 802.11 infrastructure mode.
•
Ad-hoc Mode -- uses the 802.11 ad-hoc mode
For more information of 802.11 wireless network modes, please see
Overview" on page B-35
Connect to an Access Point in Infrastructure Mode
NETGEAR 54 Mbps Wireless
PC Card WG511 in a
Notebook Computer
Figure 3-1: WG511 Wireless PC Card connecting to a wireless access point.
This section provides instructions for configuring the NETGEAR 54 Mbps Wireless PC Card
WG511 to connect to a wireless access point.
3-22
of this manual.
Wireless Access Point
Cable/DSL Router
Cable or DSL modem
"Wireless Networking
Configuration
Advertisement
Table of Contents
