Table of Contents
Advertisement
A Road Map for 'How to Get There From Here'
The introduction and adoption of any new technology can be a difficult process. Wireless
technology has removed one of the barriers to networking: running wires. It allows more people to
try networking while at the same time exposes them to the inherent complexity of networking.
General networking concepts, set up, and maintenance can be difficult to understand. In addition,
wireless technology adds issues, such as range, interference, signal quality, and security to the
picture.
To help overcome potential barriers to successfully using wireless networks, the table below
identifies how to accomplish such things as connecting to a wireless network, assuring appropriate
security measures are taken, browsing the Internet through your wireless connection, exchanging
files with other computers and using printers in the combined wireless and wired network.
Table 1-1.
A Road Map for How to Get There From Here ...
If I Want To ... ? What Do I Do?
Connect to a
1. Identify the
wireless
wireless
network
network name
(SSID) and, if
used the
wireless
security
settings.
2. Set up the
NETGEAR 54
Mbps Wireless
PC Card
WG511 with
the settings
from step 1.
Introduction
Installation Guide for the NETGEAR 54 Mbps Wireless PC Card WG511
What's Needed?
1. A wireless network
2. A notebook PC within the
operating range of the wireless
network. For guidelines about
the range of 802.11b wireless
networks, please see
2"Observe Location and
Range Guidelines" on page
2-8.
How Do I?
To set up the WG511, see
Chapter 2, Basic Setup
follow the instructions provided.
To learn about wireless
networking technology, please
see
Appendix B-35, "Wireless
Networking Basics"
for a general
introduction.
and
1-3
Advertisement
Table of Contents
