Table of Contents
Advertisement
Installation Guide for the NETGEAR 54 Mbps Wireless PC Card WG511
For Windows 2000 & 98/Me Users Installing a WG511
Install the WG511 driver and configuration
utility software.
Note: Windows 2000, may require you to be
logged on with administrator rights.
Power on your notebook, let the
a.
operating system boot up completely,
and log in as needed.
Insert the Resource CD for the WG511
b.
into your CD-ROM drive. The CD index
page shown at the right will load.
Click the INSTALL button and an Install
c.
Software window opens. Read the
instructions for running the software
setup utility.
Click the Install Software link. When the
d.
browser warning message appears, click
Open to start the Install Shield Wizard.
Follow the steps in the Install Shield
e.
Wizard, and click Finish when done to
restart your computer.
2-14
WG511 Resource CD
Note: If the Resource CD page does not automatically
appear, browse the root directory of the CD and
double-click on INDEX
InstallShield Wizard
.
HTM to display this page.
Basic Setup
Advertisement
Table of Contents
