Cisco 881W - Integrated Services Router Wireless Hardware Installation Manual page 60

Connecting the 3G Card
Close the locking bracket, as shown in
Step 4
Figure 3-10
1
3G card
Insert the screws, as shown in
Step 5
Figure 3-11
4
3
1
3G card
2 Locking bracket
To connect the antenna to the 3G card, insert the antenna connector into the antenna connector hole on
Step 6
the 3G card.
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
3-12
Closing the Locking Bracket
1
Figure
Inserting the Screws
1
4
2
Figure 3-12 show the antenna connected to the 3G card.
Figure 3-10.
2
2
Locking bracket
3-11, and tighten with a number 2 Phillips screwdriver.
3
Screws
4 Screw holes on the locking bracket
Chapter 3 Connecting the Router
OL-16193-03