Installing In A Rack - Cisco 881W - Integrated Services Router Wireless Hardware Installation Manual

Chapter 2 Installing the Router

Installing in a Rack

The Cisco 890 series ISRs can be mounted in a rack. To install a Cisco 890 series ISR in a rack, follow
these steps:
Remove the screws shown in
Step 1
Figure 2-6
1
1
Step 2 Using the screws provided, attach the rack-mount brackets to the Cisco 890 series ISR chassis as shown
in Figure
screws on both sides of the chassis.
Do not overtorque the screws. The recommended torque is 6 to 8 in-lb (0.7 to 0.9 N-m).
Caution
Figure 2-7
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
OL-16193-03
Figure
Screw Location
Screws
2-7. Use two screws on each side. Use a number 2 Phillips screwdriver to install the bracket
Attaching the Rack-mount Brackets to the Cisco 890 Series ISR
2-6.
1
Installing the Router
2-9