Connecting a Modem to the Auxiliary Port
•
•
When the terminal emulator establishes communications, the router prompt is displayed.
For more information on terminal emulation settings, see
for Console Connections.
Connecting a Modem to the Auxiliary Port
To connect a modem to the router, follow these steps:
Step 1
Connect the RJ-45 end of the adapter cable to the Aux port on the router as shown in
Figure 3-6
1
2
Connect the DB-9 end of the console cable to the DB-9 end of the modem adapter.
Step 2
Connect the DB-25 end of the modem adapter to the modem.
Step 3
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
3-8
1 stop bit
No flow control
Connecting a Modem to the Aux Port
2
Aux port (RJ-45)
Light blue console cable
Applying Correct Terminal Emulator Settings
1
3
DB-9 to DB-25 modem adapter (if required)
4
Modem
Chapter 3
Connecting the Router
Figure
3
4
OL-16193-03
3-6.