Cisco 881W - Integrated Services Router Wireless Hardware Installation Manual page 24

Cisco 880 Series ISRs
Figure 1-9
Figure 1-9
1
Primary WAN port
on the C888ESRST-W. Voice BRI on the
IAD888EF
2
Voice ports—four FXS
voice BRI
3
4-port 10/100 Ethernet switch
4 Serial port—console or auxiliary
5 PoE power connector—optional
1. Depending on the router model, the primary WAN port can be either G.SHDL or 10/100 FE.
2. FXS = Foreign Exchange Station.
3. DID = Direct Inward Dialing.
4. BRI = Basic Rate Interface.
Caution
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
1-10
shows the back panel details of the Cisco 888SRST-W voice router.
Back Panel of the Cisco C888SRST-W, Cisco IAD888EF, Cisco C888ESRST, and Cisco
C888ESRST-W Voice RouterRouters
2 1 2
1
—G.SHDSL, RJ-45 only
2 3
/DID ports and one
4
port
The primary WAN port on all 888E models is designed for an RJ-45 connector only. Damage
to the primary WAN port may occur if a non RJ-45 connector is inserted.
6 3 4
6
Antenna—captive wireless omnidirectional
dipole WLAN antenna (wireless models only)
7
Reset button
8
Power connector
9 Earth ground connection
10 Kensington security slot
Chapter 1 Product Overview
5 7 8 9 10
OL-16193-03