Hardware Features - Cisco 881W - Integrated Services Router Wireless Hardware Installation Manual

Chapter 1 Product Overview
Figure 1-13
RP-TNC antenna or connectors on the back panel. Some of the features that are shown may not be
available on your router. However, the feature locations are similar across all Cisco 890 series routers.
Figure 1-13
1
2
3
4
5
6
1. The Data BRI port is available only on the Cisco 892 router models.
2. The V.92 port (not shown) is available only on the Cisco 891 router models and is located between the console port and the

Hardware Features

This section provides an overview of the following hardware features for the Cisco 860 series, 880
series, and 890 series ISRs. A feature summary is available at the end of this section.
•
•
•
•
•
•
•
Cisco 860 Series, Cisco 880 Series, and Cisco 890 Series Integrated Services Routers Hardware Installation Guide
OL-16193-03
shows the back panel details of the Cisco 892-W router. Nonwireless routers do not have
Back Panel of the Cisco 892-W Router
1
2 3
Antenna—dipole swivel antenna attached to
RP-TNC connectors (wireless models only)
1
Backup—Data BRI or V.92
Primary WAN port—FE and GE
Auxiliary port
Console port
8-port 10/100 Ethernet switch
Ethernet switch.
Kensington Lock
Reset Button
LEDs
Memory
USB Port
Fan
Power over Ethernet Module
4 5
7 PoE power connector
2
port 8 Reset button
9
Power connector
10 Earth ground connection
11 Kensington security slot
Hardware Features
6 7 8 9 10 11
1-13