Carriage Controls - Grizzly G0554 Owner's Manual

C
e
A. compound Rest: Adjustable to 120°.
b. compound Handwheel: graduated to
0.001" or 0.02 mm.
c. cross Slide: Moves back-and-forth along
the y-axis and supports the compound rest.
D. cross Slide Handwheel: graduated to
0.001" or 0.02 mm.
E. Saddle: rides on top of the bed ways while
supporting the cross slide and apron.
F. carriage Lock: locks the carriage assem-
bly in place for greater rigidity and accuracy
when cutting.
-8-

carriage controls

A
d
l
Figure 3. Model g0554 Carriage controls.
B
g
h
K
G. Thread Dial: used in conjunction with thread
cutting.
H. Thread Dial chart: Keys for inputting the
desired angle of the saw blade.
i. Half Nut Lever: engages the half nut for
longitudinal power feed and threading opera-
tions.
J. Spindle ON/OFF Lever: lifting up turns the
spindle ON clockwise. push down for coun-
terclockwise spindle rotation.
K. power Feed Lever: determines longitudinal
and cross feed directions.
L. Longitudinal Handwheel. Manually moves
the carriage in the X-axis. graduated to
0.005" or 0.1 mm.
g0554 gear-head Floor lathe
F
i
J