Grizzly G0554 Owner's Manual page 47

H2670—HSS Square Tool bits ½" x ½" x 4
our ground tool bits are M-2 hss, making them
some of the most durable tool bits around. Make
your own specialized cutters in any shape using
a silicon carbide grinding wheel (g8235-37) on
your grinder.
Figure 68. h2670 hss square tool Bits.
H5687—8-pc. pre-Ground Tool bit Set
tired of grinding your blank high speed steel tool
bits? We've done it for you! 8-pc set comes with
these sharpened profiles: offset right and left hand
tools with chip breaker, straight and chip breaker
style threading tools, internal threading tool, part-
ing tool, boring tool and turning tool. these tool
bits are evenly hardened to better than 64C.
Figure 69. h5687 pre-ground tool Bit set.
g0554 gear-head Floor lathe
G9777—20-pc. carbide Tipped Tool bit Set
An exceptional value for carbide lathe tool bits!
this twenty-piece set offers tremendous savings
over bits sold individually, plus every type is dupli-
cated and ready at hand when you need it. the
carbide is C-6 grade for cutting steel and alloys.
Figure 70. g9777 20 pc. Carbide tool set.
G5640—5-pc. indexable carbide Tool Set ½"
G6706—Replacement TiN coated carbide
indexable insert
Five-piece turning tool set features indexable car-
bide inserts with "spline" type hold-down screw
that allow indexing without removing the screw.
each set includes Ar, Al, Br, Bl, and e style
tools with carbide inserts, hex wrench, extra hold-
down screws and a wooden case.
Figure 71. g5640 5 pc. indexable tool set.
-43-