Safety And Regulatory Compliance Information - Cisco 1605-R How To Use Manual

Safety and Regulatory Compliance Information

Table 1-4
WAN Interface Card
1-Port ISDN BRI S/T
Leased Line
(WIC-1B-S/T-LL)
1-Port 56/64-kbps
CSU/DSU
(WIC-1DSU-56K4)
1-Port T1/FT1
(WIC-1DSU-T1)
1 1-Port ISDN BRI U card is not available with Cisco 1603 or Cisco 1604 routers. The BRI U module does
not require an external NT1.
2 1-Port ISDN BRI S/T card is not available with Cisco 1603 or Cisco 1604 routers. Some ISDN service
providers require an external Network Termination 1 (NT1) device to connect an ISDN S/T port to the ISDN
line. If your service provider requires this, you must provide the NT1.
3 1-Port ISDN BRI S/T Leased-line card is only available with Cisco 1603 or Cisco 1604 routers. Some ISDN
service providers require an external Network Termination 1 (NT1) device to connect an ISDN S/T port to
the ISDN line. If your service provider requires this, you must provide the NT1.
Safety and Regulatory Compliance Information
This section lists safety warnings that you should be aware of before installing a network
module or interface card in the router. To see translated version of the safety warnings
contains in this guide, refer to the Cisco Regulatory Compliance and Safety Information
publication that accompanied your router.
This section includes:
•
Safety Recommendations on page 1-17
•
Safety with Electricity on page 1-18
•
Preventing Electrostatic Discharge Damage on page 1-19
•
FCC Class B Compliance on page 1-20
•
FCC Part 68 on page 1-20
1-16 Cisco WAN Interface Cards Hardware Installation Guide
WAN Interface Card Options with Cisco IOS Releases for Cisco 1600
Series Routers (continued)
Cisco IOS Cisco IOS
Release 11.1 Release 11.2
3
- 11.2(9)P
- 11.2(12)P
- 11.2(12)P
Cisco IOS Cisco IOS
Release 11.3 Release 11.3T
- 11.3(3)T
- 11.3(3)T
- 11.3(3)T