Cisco 1605-R How To Use Manual page 17

Figure 1-6 Cisco 2600 Series Unit Numbers
BRI 1/0
Serial 1/0
Ethernet
Ethernet
1/1 1/0
Note
if the interface card is installed in the slot labeled W1.
Figure 1-6 shows the following unit numbers:
•
First Ethernet interface, referred to as Ethernet 0/0
•
Token Ring interface, referred to as Token Ring 0/0
•
Slot W0, serial interface 0, referred to as serial 0/0
•
Slot W1, serial interface 1, referred to as serial 0/1
•
Slot 1, Ethernet interface 0, referred to as Ethernet 1/0
•
Slot 1, Ethernet interface 1, referred to as Ethernet 1/1
•
Slot 1, serial interface 0, referred to as serial 1/0
•
Slot 1, BRI interface 0, referred to BRI 1/0
Serial 0/1 Serial 0/0
W1
W0
LINK
TOKEN RING 0/0 ACT
LINK
ETHERN ET 0/0 ACT
CONSO LE
Ethernet
0/0
Token Console
Ring 0/0
port
WAN interface card slots (built into the chassis) are always numbered as slot 0, even
Cisco 2600 Series Interface Numbering
Cisco 2612
100-240 V– 1A
50/60 Hz 47 W
W0
AUX
Auxiliary
port
Overview of Cisco WAN and Voice Interface Cards 1-9