Cisco 1605-R How To Use Manual page 19

WAN and Voice Interface Card Options for Cisco 2600 Series Routers
Table 1-2 WAN and Voice Interface Card Options with Cisco IOS Releases for
Cisco 2600 Series Routers
WAN Interface Card
1-Port Serial (WIC-1T)
2-Port Serial (WIC-2T)
2-Port Asynchronous/Synchronous
Serial (WIC-2A/S)
1
1-Port ISDN BRI S/T
(WIC-1B-S/T)
2
1-Port ISDN BRI U
(WIC-1B-U)
1-Port 56/64-kbps CSU/DSU
(WIC-1DSU-56K4)
1-Port T1/FT1 (WIC-1DSU-T1)
2-Port FXS voice/fax interface
(VIC-2FXS)
2-Port FXO voice/fax interface
(VIC-2FXO)
2-Port E&M voice/fax interface
(VIC-2E/M)
2-Port FXO voice/fax interface for
use in Europe
(VIC-2FXO-EU)
2-Port E&M voice/fax interface for
use in Australia
(VIC-2FXO-M3)
2-Port ISDN BRI voice interface
(VIC-2BRI-S/T-TE)
1 Some ISDN service providers require an external Network Termination 1 (NT1) device to connect an ISDN
S/T port to the ISDN line. If your service provider requires this, you must provide the NT1.
2 The BRI U module does not require an external NT1.
Cisco IOS Cisco IOS
Release Release
11.3 11.3T
11.3(2)XA 11.3(4)T
11.3(2)XA 11.3(4)T
11.3(2)XA 11.3(4)T
11.3(2)XA 11.3(4)T
11.3(2)XA 11.3(4)T
11.3(2)XAT 11.3(4)T
– 11.3(4)T
– 11.3(1)T
– 11.3(1)T
– 11.3(1)T
– 11.3(6)T
– 11.3(6)T
– –
Overview of Cisco WAN and Voice Interface Cards 1-11
Cisco IOS Cisco IOS
Release Release
12.0 12.0T
12.0(1) 12.0(1)T
12.0(1) 12.0(1)T
12.0(1) 12.0(1)T
12.0(1) 12.0(1)T
12.0(1) 12.0(1)T
– 12.0(1)T
– 12.0(1)T
12.0(1) 12.0(1)T
12.0(1) 12.0(1)T
12.0(1) 12.0(1)T
– 12.0(1)T
– 12.0(1)T
12.0(2)XD –