Honeywell 4600RSF051CE User Manual page 62

imager's field of view. The following diagram illustrates the default top, bottom,
left, and right pixel positions, measured from the top and the left side of the
imager's field of view, which is 640 by 480 pixels.
0
40%
60%
100%
If a barcode is not within the predefined window, it will not be decoded or output
by the imager. If centering is turned on by scanning Centering On, the imager
only reads codes that intersect the centering window you specify using the Top,
Bottom, Left, or Right barcodes.
Scan Centering On, then scan one of the following barcodes to change the top,
bottom, left, or right of the centering window. Then scan the percent you want
to shift the centering window using digits on the inside back cover of this man-
ual. Scan Save. Default Centering = 40% for Top and Left, 60% for Bottom
and Right.
Centering On
Top of Centering Window
Left of Centering Window
3 - 14
40%
Top
Bottom
Left
Right
60%
Default
Center
Bottom of Centering Window
Right of Centering Window
100%
* Centering Off