Upc-A - Honeywell 4600RSF051CE User Manual

UPC-A

UPC-A
* On
UPC-A Check Digit
This selection allows you to specify whether the check digit should be transmit-
ted at the end of the scanned data or not. Default = On .
* On
UPC-A Number System
The numeric system digit of a UPC symbol is normally transmitted at the begin-
ning of the scanned data, but the unit can be programmed so it will not transmit
it. Default = On.
* On
7 - 18
<Default All UPC-A Settings>
Off
Off
Off