Code 39 Code Page; Interleaved 2 Of 5 - Honeywell 4600RSF051CE User Manual

Character pairs /M and /N decode as a minus sign and period respectively.
Character pairs /P through /Y decode as 0 through 9.
Full ASCII On
* Full ASCII Off

Code 39 Code Page

Code pages define the mapping of character codes to characters. If the data
received does not display with the proper characters, it may be because the
barcode being scanned was created using a code page that is different from
the one the host program is expecting. If this is the case, scan the barcode
below, select the code page with which the barcodes were created (see Code
Page Mapping of Printed Barcodes on page A-6), and scan the value and the
Save barcode from the Programming Chart on the inside the back cover of this
manual. The data characters should then appear properly.
Code 39 Code Page

Interleaved 2 of 5

< Default All Interleaved 2 of 5 Settings >
Interleaved 2 of 5
* On
Off
Check Digit
No Check Digit indicates that the imager reads and transmits barcode data
with or without a check digit.
7 - 8