Honeywell 4600RSF051CE User Manual page 229

1. Scan the sample barcodes in the back of this manual. If the imager reads
the sample barcodes, check that your barcode is readable.
Verify that your barcode symbology is enabled (see
2. If the imager still can't read the sample barcodes, scan "All Symbologies" on
page 7-2.
If you aren't sure what programming options have been set in the imager, or if
you want the factory default settings restored, scan
Settings on page 12-4.
Chapter 7).
Standard Product Default
14 - 5