AlcoQuant 6020 plus
Operation
PC icon
Operation
Battery icon
with
continuous
bars
Operation
Device
switches off
automatically
after a certain
period of time
Operation
Battery icon
blinks and
cyclical
warning tone
Operation
Battery empty Device
34
RED flashes The battery voltage is too low.
beeps
and
switches
off after a
short
period of
time.
Move AlcoQuant 6020 plus closer
to the printer.
Check, if the used printer has
wireless printing capability at all.
Set >Printer Setup< to >Cable<
and have a test printout, to check
if there is a general printing
problem.
PC connection active
No measurements are possible.
Charging adapter connected.
No measurements are possible.
The device switches itself off
automatically after 2 minutes of
non-activity to save energy.
The auto-off function is
configurable in the Setting menu.
The battery voltage is very low.
The batteries/accumulator must
be replaced/recharged as soon as
possible.
Measurements are still possible.
Device switches off.
Replace/charge the
batteries/accumulator.
Doc no.: 059-07-1001779_A6020plus_GB-5.2.1 / 12.2021