Makita DCU601 Instruction Manual page 19

5. Hold the handles firmly with both hands.
Fig.28
6. Pull the switch trigger.
1
Fig.29
► 1. Switch trigger
Loading objects
CAUTION:
Before loading objects on the
machine, make sure that the machine is turned off
and the brake lever is locked.
CAUTION:
Be sure to load objects within the
carrier. If objects are sticking out of the carrier, they
may fall or collapse if they touch obstacles.
Fig.30
CAUTION:
Be sure to load objects so that
they are below eye level. If the load is too high, it is
dangerous because the view is obscured. Also, there
is a risk of overturning and injury because the load is
likely to be unbalanced.
Fig.31
When loading objects on the carrier, secure the objects with
ropes and tie them down to the rope hooks of the carrier.
1
Fig.32
► 1. Rope hook
Lifting and lowering the carrier
CAUTION:
Before lifting or lowering the car-
rier, be sure to lock the brake lever.
CAUTION:
Lift or lower the carrier on flat and
stable ground. Operation on unstable ground may
cause an accident or injury.
CAUTION:
Keep the load to a minimum. If the
load is large, do not try to lift the carrier. Reduce
the load, and then lift the carrier.
CAUTION:
When lifting or lowering the car-
rier, never insert or place a part of your body
under the carrier.
CAUTION:
Before lifting or lowering the car-
rier, make sure that there are no people or obsta-
cles around the machine.
You can lift and lower the position of the carrier using
the up-and-down switch.
1.
Stop the machine, and then lock the brake lever.
2. Lift the carrier using the up-and-down switch while
holding the brake lever.
19 ENGLISH