Honeywell S7800A Installation Manual page 31

. . . LOCKOUT . . . . . . .
Fig. 74. LOCKOUT screen.
Using the left/right arrow will move the cursor left and right. Up
and down arrows will move you through the series of available
scripts (See Table 9). Up to 20 characters per line (you have
two lines available) can be used in your message.
NOTE: Moving through the scripts:
1. Pressing and holding an up/down arrow will fast
forward to the end of the current script.
2. A space is located between the capital and lower
case alphabets.
3. A space is added if you move the cursor right
when it is under an empty character position.
Pressing the ENTER keys will show:
< Clear
Save
Exit EOL
Fig. 75. Save/Exit/Clear EOL screen.
Pressing the left arrow will clear text on the line you are on and
return you to the CS Edit screen. When you have finished
entering your description, press the ENTER keys.
< Clear
Save
Exit EOL
Fig. 76. Save/Exit/Clear EOL screen.
7800 SERIES S7800A KEYBOARD DISPLAY MODULE
Press the down arrow to Save.
Call Service Setup
Edit Screen: 1
Fig. 77. Call Service Setup screen.
Use the up arrow to go to screen 2 or 3. Repeat the above
steps for custom messages you wish to create. When
complete with your final message, press ENTER.
Save
Exit
Fig. 78. Save/Exit/Clear EOL screen.
Use the up arrow to select Exit.
DISPLAY Setup
Select: CS EDIT
Fig. 79. DlSPLAY Setup/Select CS EDlT screen.
Use the up arrow to scroll to CS TEST item to view your
message. Return back to CS EDIT to make any corrections.
Use the up arrow to scroll to CS ON/OFF to turn on your
customer Call Service message.
Press ENTER, then Exit if you are finished.
31
< Clear
EOL
65-0090-6