Makita DUH507SF Instruction Manual page 11

11. Place the new shear blades on the tool so that
the resin sleeves fit in the holes in the gear. If the resin
sleeves on the pins come off mistakenly, put them into
the holes in the gear beforehand.
Fig.15
► 1 . Shear blades 2. Resin sleeve 3. Hole
12. Slide the guide bar as shown in the figure.
Fig.16
1
2
3
11 ENGLISH
13. Place the metal sleeves and the flat washer, then
tighten the bolts.
3
Fig.17
► 1 . Metal sleeve 2. Flat washer 3. Bolt
14. Attach the cover, and then tighten 6 screws.
1
Fig.18
► 1 . Screw 2. Cover
1
2
3
2