Inventory - Grizzly G0490ZX Owner's Manual

Inventory

The following is a list of items shipped with your
machine. Before beginning setup, lay these items
out and inventory them.
If any non-proprietary parts are missing (e.g. a
nut or a washer), we will gladly replace them; or
for the sake of expediency, replacements can be
obtained at your local hardware store.
Inventory (Figures 6–7)
A. Table ........................................................... 1
B. Fence Carriage ........................................... 1
C. Fence ......................................................... 1
D. Cutterhead Guard ....................................... 1
E. Fence Tilt Handle ....................................... 1
Loose Tools:
F.
— Wrench 8/10mm ...................................... 1
— Wrench 12/14mm .................................... 1
—Hex Wrenches 2.5, 4, 5, 6, 8mm ......1 Ea.
G. Push Blocks ................................................ 2
H. Cabinet w/Motor ......................................... 1
Control Panel Pedestal (Inside Cabinet) .... 1
I.
Pedal Assembly .......................................... 1
J.
K. Belt Guard .................................................. 1
L. V-Belt 8PK-1172 .......................................... 1
M. Dust Port .................................................... 1
Hardware Bag (Not Shown)
Carriage Bolts M8-1.25 x 30 (Motor) .......... 2
•
Flat Washers 8mm (Motor) ......................... 2
•
Hex Nuts M8-1.25 (Motor) .......................... 2
•
Hex Bolt M8-1.25 x 50 (Pedal/Cabinet) ...... 1
•
Flat Washer 8mm (Pedal/Cabinet) ............. 1
•
Hex Bolts M10-1.5 x 55 (Pedal/Cabinet) ..... 2
•
Flat Washers 10mm (Pedal/Cabinet) .......... 2
•
Hex Nuts M10-1.5 (Wheel/Cabinet) ............ 2
•
Cap Screws M8-1.25 x 25 (Table/Cabinet) . 8
•
Lock Washers 8mm (Table/Cabinet) .......... 8
•
Flat Washers 8mm (Table/Cabinet) ............ 8
•
Flange Bolts M6-1 x 12 (Belt Guard) .......... 2
•
Flat Washers 6mm (Belt Guard)................. 2
•
Hex Nuts M6-1 (Belt Guard) ....................... 2
•
Driver Bits Torx T20 ................................... 2
•
L-Wrenches Torx T20 ................................. 2
•
Flat Hd Torx Screws T20 M6-1 x 15 ........... 3
•
Indexable Carbide Inserts 14 x 14 x 2mm .. 3
•
-14-
A
B
G
Qty
Figure 6. G0490ZX Box 1 Inventory.
H
Figure 7. G0490ZX Box 2 Inventory.
If you cannot find an item on this list, care-
fully check around/inside the machine and
packaging materials. Often, these items get
lost in packaging materials while unpack-
ing or they are pre-installed at the factory.
F E
L
K
M
NOTICE
Model G0490ZX (Mfd. Since 05/23)
C
D
I
J