Makita DTD155 Repair Manual page 7

Fig. 8
[2] [1]
Fig. 9
[1]
Fig. 10
1R041
Fig. 11
]
[2
4
Remove Hammer case [1] and Motor section [2] together
from Housing L [3], and then pull out Motor section [2]
[3]
from Hammer case [1].
5
Insert a slotted driver between Bumper [1] and Hammer
case cover [2] to pry off Bumper [1].
[2]
6
Hold the flats of Hammer case complete [1] in a vise.
Hold the flats of Hammer case complete [1] in a vise with
1R041.
[1]
7
Remove Bearing box with a commercial Extension bar, to
which Socket 27 [2] is attached.
Turn Bearing box [1] clockwise to remove.
[1]
7 / 26
Note
Tip