Makita DTD155 Instruction Manual
Hide thumbs
Also See for DTD155:
- Instruction manual (69 pages) ,
- Repair manual (26 pages) ,
- Instruction manual (73 pages)
Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Related Manuals for Makita DTD155
Summary of Contents for Makita DTD155
- Page 1 INSTRUCTION MANUAL Cordless Impact Driver DTD155 Read before use.
-
Page 2: Specifications
SPECIFICATIONS Model: DTD155 Fastening capacities Machine screw 4 mm - 8 mm Standard bolt 5 mm - 14 mm High tensile bolt 5 mm - 12 mm No load speed Hard impact mode 0 - 3,000 min Soft impact mode... -
Page 3: General Power Tool Safety Warnings
Use personal protective equipment. Always SAFETY WARNINGS wear eye protection. as a dust mask, non-skid safety shoes, hard hat or hearing protection used for appropriate conditions General power tool safety warnings Prevent unintentional starting. Ensure the WARNING: switch is in the off-position before connecting Read all safety warnings, instruc- to power source and/or battery pack, picking up or carrying the tool. - Page 4 Use the power tool, accessories and tool bits Cordless impact driver safety etc. in accordance with these instructions, tak- warnings ing into account the working conditions and the work to be performed. Use of the power tool Hold the power tool by insulated gripping for operations different from those intended could surfaces, when performing an operation result in a hazardous situation.
-
Page 5: Functional Description
Only use genuine Makita batteries. Use of non-genuine Makita batteries, or batteries that have been altered, may result in the battery bursting also void the Makita warranty for the Makita tool and charger. Tips for maintaining maximum 1. Red indicator 2. Button 3. Battery cartridge... - Page 6 Overheat protection Indicating the remaining battery capacity before turning the tool on again. Only for battery cartridges with the indicator Overdischarge protection When the battery capacity is not enough, the tool stops automatically. In this case, remove the battery from the tool and charge the battery.
- Page 7 Lighting up the front lamp Reversing switch action CAUTION: Do not look in the light or see the source of light directly. 1. Reversing switch lever CAUTION: Always check the direction of 1. Lamp rotation before operation. CAUTION: Use the reversing switch only after the tool comes to a complete stop.
- Page 8 Changing the impact force You can change the impact force in three steps: hard, Every time the button is pressed, the number of blows changes in three steps. driving screws with good control. In this mode, the tool drives a screw with low-speed trigger, the impact force can be changed.
-
Page 9: Installing Hook
ASSEMBLY tion of the arrow and insert the bit-piece and driver should be inserted into the sleeve with its pointed CAUTION: Always be sure that the tool is switched off and the battery cartridge is removed the driver bit. before carrying out any work on the tool. Installing or removing driver bit/ socket bit Optional accessory... -
Page 10: Operation
High tensile bolt OPERATION (1224) (1020) (816) (612) (408) (204) Standard bolt diameter (1224) (1020) the tool on to start operation. (816) NOTICE: If you use a spare battery to continue the operation, rest the tool at least 15 min. (612) NOTE: bolt that you wish to use. -
Page 11: Maintenance
OPTIONAL ACCESSORIES CAUTION: These accessories or attachments are recommended for use with your Makita tool accessories or attachments might present a risk of for its stated purpose. If you need any assistance for more details regard- ing these accessories, ask your local Makita Service Center. - Page 12 Jan-Baptist Vinkstraat 2, Makita Europe N.V. 3070 Kortenberg, Belgium 3-11-8, Sumiyoshi-cho, Makita Corporation Anjo, Aichi 446-8502 Japan 885520-229 www.makita.com 20161128...