Maytag MFS25PN Service Manual page 42

PAUSE
Message:
Explanation:
Solution:
"PAUSE" appears on the display and the buzzer sounds.
This happens when the "SIGNAL ?"function has been programmed in
a particular step.
Press "Start" to continue the process.
PROCESS COMPLETE PLEASE WAIT
Message:
Explantion:
Solution:
"PROCESS COMPLETE PLEASE WAIT" appears on the display.
This happens when the wash cycle is completed.
When the wash cycle is completed, you may remove the laundry
from the washing machine from the moment "SELECT PROCESS - -"
appears on the display and the wash basket has stopped.
PROCESS MEMORY EXCEED
Message:
Explanation:
Solution:
SERVICE DUE
Message:
"PROCESS MEMORY EXCEED" appears on the display.
This message is displayed if the memory has been exceeded during
programming of a wash cycle. This will happen if a step is inserted
into a program that exceeds memory capacity.
After pressing the "Yes" button, you can continue with programming
but no further steps can be added to the program. If you press the
"No" keypad, the programming will be finished.
"SERVICE DUE" appears on the display.
Exp la nation: When the number of completed wash cycles reaches the target figure
(pre-set in the initialization mode) the following message will appear:
Solution:
TOO HOT
Message:
Explanation:
"SERVICE DUE." This means the machine is due for service.
The message can be canceled by pressing the "Start" keypad.
"TOO HOT" appears on the display and the buzzer sounds.
This happens when the temperature probe records a temperature
above 50°C or (122°F) at a moment when the poor may normally be
opened, or if the temperature probe fails, or if water temperature in
cage exceeds target temperature by 2.5°C (25°F). All other machine
functions are switched off.
CAUTION
Except as necessary to perform a particular step in servicing a product, the
electrical power supply should ALWAYS be disconnected.
16009607 Section 4. Troubleshooting
©1999 Maytag Appliances Sales Company
4-6