AEG Protect B Operating Instructions Manual page 81

Inserting the new battery system
Follow the steps described above in reverse order.
For safety and efficiency reasons, only use battery replacement kits from
AEG PS.
Assemble the plug connection so that it is secure.
Disposal of used batteries and accumulators
(applicable within the European Union and other European countries
with separate collection systems for these products).
This symbol on the accumulator or the packaging indicates that these
products are not to be handled in the same way as normal household
garbage. An additional "Pb" (lead) chemical symbol underneath the
crossed-out trashcan means that the accumulator has a lead content
of more than 0.4%.
By correctly disposing of these accumulators, you are protecting the
environment and the health of your fellow man. Incorrectly disposing of
these accumulators poses environmental and health hazards. Recycling
materials helps to reduce the consumption of raw materials.
In the case of products that require constant connection to the installed
battery to protect against data loss, the battery should only be replaced
by qualified service personnel.
EN
D - Pull the battery system by
the plastic casing toward
you and replace the
battery system with
a replacement kit.
81