Operating Installation - Honeywell 50202 Manual

30. Use the fan reverse switch, located on the side
of the light kit, to optimize your fan for seasonal
performance (Fig. 30).
Using a ceiling fan will allow you to raise your
thermostat in the summer and lower your
thermostat in the winter without sacrificing comfort.
Important: Wait for the fan to stop before moving the
reverse switch. The reverse switch must be set
either completely up or down in order for the fan to
function correctly. If the reverse switch is set in the
middle position, the fan will not operate.
31. In warmer weather, push the reverse switch
down, which will result in downward airflow
creating a wind chill effect (Fig. 31).
Note: Energy savings are possible by turning on the
ceiling fan and setting the thermostat a few degrees
warmer. To maximize savings, turn ceiling fan off
when no one is in the room.
32. In cooler weather, push the reverse switch up and
the fan to low, which will result in upward airflow that
can help move stagnant, hot air off the ceiling area.
By mixing the air, the heat may not have to run as
often and may yield energy savings (Fig. 32).
OPERATING INSTRUCTIONS
17
Fig. 30
Fig. 31
Fig. 32
Reverse
Switch