Care And Cleaning - Black & Decker PR100SD Use And Care Manual

2. Press the delay start button
and a default time will appear on the LED display. First adjust the hours
as needed by pressing the + or – buttons (adjusts in 1 hour increments),
then press delay start
– buttons (adjusts in 10 minute increments).
3. Once adjusted to desired delay start time, then press the Start button
and follow the standard instructions.
C A R E A N D C L EA N I N G
This product contains no user serviceable parts. Refer service to qualified
service personnel.
CLEANING
IMPORTANT: Never immerse cooking base in water or other liquids.
1. Always unplug and allow to completely cool before cleaning.
2. Wash cooking bowl and lid in warm, soapy water. If food sticks to the
cooking bowl fill the bowl with warm, soapy water and allow it to soak
before cleaning with plastic scouring pad.
NOTE: the cooking bowl is dishwasher safe.
3. Rinse and dry thoroughly.
4. Wipe interior and exterior of the cooking base with a soft, slightly damp
cloth or sponge. Never use abrasive cleaners or scouring pads to clean
the cooking base, as they may damage the surfaces.
5. Remove the gasket, anti block shield and pressure release valve from lid
and wash in warm soapy water. Allow parts to dry completely before
reassembling.
STORING
Make sure that the appliance is thoroughly dry. Never wrap the cord tightly
around the appliance; keep it loosely coiled.
, a red light will flash above the function
again to adjust the minutes by pressing the + or
17