Care And Cleaning - Black & Decker PR100 Use And Care Manual

4 . Press either the Slow Cook High
or the Slow Cook Low
red light will begin flashing above the
selected function, and the LED display
will flash with 6 hour default for HIGH
and an 8 hour default for LOW . Press
the + or – buttons to adjust the time .
5 . Press the START button . The red
light will turn solid above the chosen
function and the timer will begin to
count down .
6 . Once the time is up, the pressure
cooker will automatically switch to
keep warm . A flashing red light will
illuminate above the Keep Warm
button and the timer will flash and
begin to count up .
7 . To open the lid: Hold the lid handle
and turn the lid counter-clockwise
until the marking on the lid aligns
with the OPEN
pressure cooker . Lift slightly then
carefully tilt up the far edge of the
lid up so that the steam escapes
from the pot away from you .
Note: Steam may escape when opening the
lid . Always use caution when opening .
8 . Always allow the pressure cooker to
fully cool before cleaning and storage .
Note: Do not cut meats in the cooking bowl
as this may scratch the finish .
DE L AY STAR T
The delay start feature is ideal for planning
out meals on your schedule, allowing
you to delay cooking for a set amount of
time . This feature works for all functions
except browning, slow cook, and keep
warm . Always be sure to follow food safety
recommendations while cooking .
See https://www .foodsafety .gov/ for
additional information .
1 . Once a function is selected (see Preset
Cooking Functions) a red light will
flash above the selected function
and a default time will appear on the
LED display . If the time needs to be
button . A
marking on the
adjusted, press the + or – buttons to
select the correct time .
2 . Press the Delay Start (Iniciar Despues)
button, a red light will flash above the
function and a default time will appear
on the LED display . First adjust the
hours as needed by pressing the + or –
buttons (adjusts in 1 hour increments),
then press Delay Start (Iniciar Despues)
button again to adjust the minutes by
pressing the + or – buttons (adjusts
in 10 minute increments) .
3 . Once adjusted to desired delay start
time, then press the Start button and
follow the standard instructions .
CA RE A N D CLEA N IN G
This product contains no user serviceable
parts . Refer service to qualified service
personnel .
CLEANING
IMPORTANT: Never immerse cooking base
in water or other liquids .
1 . Always unplug and allow to
completely cool before cleaning .
2 . Wash cooking bowl in warm water with
dish soap . If food sticks to the cooking
bowl, fill the bowl with warm water
and dish soap . Allow it to soak before
cleaning with a plastic scouring pad .
Note: the cooking bowl is dishwasher safe .
3 . Rinse and dry thoroughly .
4 . Wipe interior and exterior of the
cooking base with a soft, slightly
damp cloth or sponge . Never use
abrasive cleaners or scouring pads to
clean the cooking base, as they may
37