Advertisement
Available languages
Available languages
5.
Never operate the string trimmer when tired,
feeling ill or under the influence of alcohol or
drugs.
6.
Avoid accidentally starting:
—
Ensure the switch is in the off posi-
tion before installing the battery pack.
Inserting the battery pack into the string
trimmer with the switch on invites accidents.
—
Carrying the string trimmer with your
finger on the switch invites accidents.
The string trimmer should be switched off
7.
immediately if it shows any signs of abnormal
operation.
Don't force the tool. It will do the job better and
8.
with less likelihood of a risk of injury at the rate for
which it was designed.
Don't overreach. Keep proper footing and
9.
balance at all times.
10. Stay Alert - Watch what you are doing. Use
common sense. Do not operate appliance
when you are tired.
11.
Store idle appliances indoors.
12. Keep fingers away from switch trigger when
not operating the tool and when moving from
one operating position to another.
Intended use of the tool
1.
Use right tool. The cordless string trimmer
is only intended for cutting grass and light
weeds. It should not be used for any other
purpose such as edging or hedge cutting as
this may cause injury.
2.
Use only the manufacturer's recommended
accessories and attachments. Use of any other
accessories and attachments may increase the
risk of injury.
Personal protective equipment
Dress Properly. The clothing worn should be
1.
functional and appropriate, i.e. it should be
tight-fitting but not cause hindrance. Do not
wear loose clothing or jewelry. They can be
caught in moving parts. Use of thick leather
gloves and substantial footwear is recom-
mended when working outdoors. Wear protec-
tive hair covering to contain long hair.
2.
In order to avoid either head, eye, hand or foot
injuries as well as to protect your hearing the
following protective equipment and protective
clothing must be used during operation of the
equipment.
3.
Always wear a helmet where there is a risk of
falling objects. The protective helmet is to be
checked at regular intervals for damage and
is to be replaced at least every five years. Use
only approved protective helmets.
Use safety glasses. The visor of the helmet (or alter-
4.
natively goggles) protects the face from flying debris
and stones. During operation of the tool always wear
goggles, or a visor to prevent eye injuries.
Wear adequate noise protection equipment to avoid
5.
hearing impairment (ear muffs , ear plugs etc.).
Work overalls protect against injury from
6.
flying stones and debris. It is strongly recom-
mended that the user wears work overalls.
7.
Special gloves made of thick leather are part of
the prescribed equipment and must always be
worn during operation of the tool.
8.
When using the tool, always wear sturdy shoes
with a nonslip sole. This protects against injuries
from flying debris and ensures a good footing.
9.
Use a dust mask if operation is dusty.
Electrical and battery safety
1.
Avoid dangerous environment. Don't use the
tool in damp or wet locations or expose it to
rain. Water entering the tool will increase the risk
of electric shock.
2.
Prevent unintentional starting. Ensure the
switch is in the off-position before connecting
to battery pack, picking up or carrying the
machine. Carrying the machine with your finger
on the switch or energizing machine that have the
switch on invites accidents.
Disconnect the battery pack from the machine
3.
before making any adjustments, changing
accessories, or storing machine. Such preven-
tive safety measures reduce the risk of starting the
machine accidentally.
4.
Recharge only with the charger specified by
the manufacturer. A charger that is suitable for
one type of battery pack may create a risk of fire
when used with another battery pack.
5.
Use machines only with specifically desig-
nated battery packs. Use of any other battery
packs may create a risk of injury and fire.
6.
When battery pack is not in use, keep it away
from other metal objects, like paper clips,
coins, keys, nails, screws or other small metal
objects, that can make a connection from one
terminal to another. Shorting the battery termi-
nals together may cause burns or a fire.
3 ENGLISH
Advertisement
