Download
Share
Print this page
Makita DUR361U Technical Information
  1. Manuals
  2. Brands
  3. Makita Manuals
  4. Trimmer
  5. DUR361U
  6. Technical information
Makita DUR361U Technical Information

Makita DUR361U Technical Information

Hide thumbs Also See for DUR361U:

Advertisement

Quick Links

Download this manual See also: Instruction Manual
T
ECHNICAL INFORMATION
Model No.
Description
C
ONCEPT AND MAIN APPLICATIONS
Models DUR361U and DUR362L are cordless grass trimmers
powered by two 18V Li-ion batteries in series.
Their main features are:
• Battery capacity warning lamp
• XPT (eXtreme Protection Technology)
• Variable speed control by dial
DUR361U is equipped with Off-set Bike handle.
DUR362L is equipped with Loop handle.
Note: 1.3Ah Li-ion battery of BL1815 cannot be used for this model.
S
pecification
Specification
Voltage: V
Capacity: Ah
Battery
Energy capacity: Wh
Cell
Charging time (approx.): min.
No load speed*
: min.
1
Standard cutting tool
Handle style
Overload protection
Electric brake
Variable speed control
Soft start
Reversing switch
Weight according to
EPTA-Procedure 01/2003*
*1 No load speed of the cutting tool
*3 With two BL1815N or two BL1820 batteries
S
tandard equipment
Battery*
5
Shoulder strap
Accessory bag
Nylon cutting head
Blade cover (Metal blade/TCT Saw blade)
*5 Battery and charger are not supplied with "Z" model.
Note: The standard equipment may vary by country or model variation.
O
ptional accessories
Metal blades (3-tooth blade, 4-tooth blade, 8-tooth blade)
TCT Saw blade
Plastic blade (cutting width: 260mm)
Nylon cutting head
Nylon cord
Protector set (for Nylon cutting head)
DUR361U, DUR362L
Cordless Grass Trimmer
Model
= rpm
-1
230mm (9") 4-tooth star blade or
230mm (9") TCT Saw blade
: kg (lbs)
2
Hex wrench 4
Box driver 13-16
4-tooth star blade (for DUR361U)
H
L2
DUR361U
Model
Length (L1) 1,888 (74-1/2)
Length (L2*)
Width (W)
Height (H)
*without Cutting tool
DUR361U
36 (18x2)
1.5, 2.0, 3.0, 4.0, 5.0
27x2, 36x2, 54x2, 72x2, 90x2
Li-ion
15x2, 24x2, 22x2, 36x2, 45x2 with DC18RC
3,500 - 7,300
300mm (11-3/4") Nylon cutting head
Bike handle
Current limiter
Yes
Yes
Yes
Yes
*
5.4 (11.9)
3,
5.9 (13.1) *
4
*2 With Nylon cutting head or 4-tooth star blade
*4 With two BL1830, BL1840 or BL1850 batteries
Battery BL1815N
Battery BL1820
Battery BL1830
Battery BL1840
Battery BL1850
Fast charger DC18RC
OFFICIAL USE
for ASC & Sales Shop
PRODUCT
P 1/ 16
W
L1
W
H
L1
L2
DUR362L
Dimensions: mm (")
DUR361U
DUR362L
1,856 (73)
1,816 (71-1/2)
1,840 (72-1/2)
600 (23-5/8)
286 (11-1/4)
458 (18)
246 (9-11/16)
DUR362L
3,500 - 6,600
Loop handle
5.1 (11.3)*
3,
5.6 (12.3)*
4
Charger *
5
Safety goggles
Hex wrench 5
Charger DC18SD
Charger DC24SC
Quad Port Charger DC18SF
Automotive charger DC18SE

Advertisement

loading

Related Manuals for Makita DUR361U

Summary of Contents for Makita DUR361U

  • Page 1 DUR361U, DUR362L Description Cordless Grass Trimmer ONCEPT AND MAIN APPLICATIONS DUR361U Models DUR361U and DUR362L are cordless grass trimmers powered by two 18V Li-ion batteries in series. DUR362L Their main features are: Dimensions: mm (") • Battery capacity warning lamp •...
  • Page 2 Retaining ring R-26 from Gear case 1R350 Ring 60 assembling Motor housing [2] LUBRICATION Apply Makita grease N. No.2 to the following portions designated with the black triangle to protect parts and product from unusual abrasion. Item No. Description Portion to lubricate...
  • Page 3 P 3/ 16 epair [3] DISASSEMBLY/ASSEMBLY [3] -1. Shaft pipe complete DISASSEMBLING (1) Remove Clamp washer complete, Blade and Receive washer. (Fig. 2) Fig. 2 1. While inserting Hex wrench 4 into the hole of Gear case 2. Remove Clamp washer complete, assembly to stop Cutter shaft revolving, turn M8 Hex nut Blade and Receive washer.
  • Page 4 P 4/ 16 epair [3] DISASSEMBLY/ASSEMBLY [3] -1. Shaft pipe complete (cont.) DISASSEMBLING (3) Remove Handle section, and pull off Shaft pipe complete. (Fig. 4) Fig. 4 1. Remove Handle holder by unscrewing 2. Unscrew M5x35 Pan head screw, 3. Unscrew five 4x18 Tapping two M5x30 Hex socket head bolts.
  • Page 5 P 5/ 16 epair [3] DISASSEMBLY/ASSEMBLY [3] -1. Shaft pipe complete (cont.) DISASSEMBLING (4) Remove Cushion from Shaft pipe complete. (Fig. 5) Fig. 5 1. Pull off Pipe rubber, and then loosen 2. Receive the end of Shaft pipe on wood and tap Cushion M5x18 Hex socket head bolt.
  • Page 6 P 6/ 16 epair [3] DISASSEMBLY/ASSEMBLY [3] -1. Shaft pipe complete (cont.) ASSEMBLING (4) Assemble Shaft pipe complete to Motor section. (Fig. 7) Fig. 7 1. Pass power supply cord unit through the hole of Cushion on Shaft pipe complete. power supply cord unit hole of Cushion Shaft pipe complete...
  • Page 7 P 7/ 16 epair [3] DISASSEMBLY/ASSEMBLY [3] -2. Gear case assembly DISASSEMBLING (1) Remove Gear case assembly from Shaft pipe complete. (See Figs. 2 and 3) (2) Remove Spiral bevel gear 14 section and Cutter shaft complete from Gear case assembly. (Fig. 8) Fig.
  • Page 8 P 8/ 16 epair [3] DISASSEMBLY/ASSEMBLY [3] -2. Gear case assembly (cont.) ASSEMBLING (1) Assemble Ball bearing 6000DDU to Cutter shaft complete. (Refer to the bottom right drawing in Fig. 8.) (2) Assemble Cutter shaft complete to Gear case. (Fig. 9) Fig.
  • Page 9 P 9/ 16 epair [3] DISASSEMBLY/ASSEMBLY [3] - 3. Helical gear 33, Spindle hub DISASSEMBLING (1) Remove the Blade and Pipe shaft complete. (Figs. 2 and 4) (2) Disassemble Helical gear 33 and Spindle hub. (Fig. 10) Fig. 10 1. Disassemble Gear box cover by unscrewing 2.
  • Page 10 P 10/ 16 epair [3] DISASSEMBLY/ASSEMBLY [3] - 3. Helical gear 33, Spindle hub (cont.) ASSEMBLING Assemble Helical gear 33 to Spindle hub by reversing the disassembly procedure. (Refer to Figs. 11 and 10) Note: • Refer to Fig. 12 for the positions of the components of Helical gear 33 section. •...
  • Page 11 P 11/ 16 epair [3] DISASSEMBLY/ASSEMBLY [3] - 4. Rotor, Stator (cont.) DISASSEMBLING (4) Disassemble Rotor and Stator from the Motor section. (Fig. 14) Fig. 14 1. Unscrew three 4x18 Tapping screws, then remove 2. Push the shaft end of Rotor against workbench Motor housing (R).
  • Page 12 P 12/ 16 epair [3] DISASSEMBLY/ASSEMBLY [3] - 4. Rotor, Stator (cont.) ASSEMBLING (1) Pass Rotor into Stator as drawn in Fig. 17. Fig. 17 1. Holding Stator complete on workbench, slowly insert Rotor 2. When the drive end of Rotor in Stator complete until small ball bearing end reaches workbench.

  • Page 13: Circuit Diagram

    P 13/ 16 ircuit diagram Fig. D-1 Color index of lead wires' sheath Brown Blue Black Gray Orange Green Yellow White Sub Controller Reverse Trigger Speed control dial switch switch Power switch Connector Connector Power supply cord unit Connector Controller Printed wiring board of Stator Fuse...

  • Page 14: Wiring Diagram

    P 14/ 16 iring diagram Fig. D-2 Wiring in Housing (L) before setting Terminals and Adapter circuit complete Put the following Controller’s lead wires between Controller and Rib A. 10-Pin connector * Lead wires to Stator * Lead wires to Power supply cord unit Rib A Sub Controller Fuse...
  • Page 15 P 15/ 16 iring diagram Fig. D-3 Wiring to Terminals Set Flag connectors to Terminals A and B as shown below. Flag connector Flag connector Terminal A Terminal B Fig. D-4 Wiring in Housing (L) with Terminals and Adapter circuit complete Lead wires of Adapter circuit complete have to be put between Rib A and Adapter circuit complete.
  • Page 16 P 16/ 16 iring diagram Fig. D-5 Wiring of Power supply cord unit in Main grip set Reverse switch Wiring to reverse switch Connect Receptacles to Reverse switch as shown below. Reverse switch Lead wires of Reverse Receptacle switch have to be put under Trigger switch.

This manual is also suitable for:

Dur362l