Cisco 4200 Series Hardware Installation Manual page 7

Overview
Feature
Network modules
AC power supply
Redundant power
Fans
Storage
Pullout asset card
Grounding
Power switch
Reset button
4215 4225
• 8-port 1/10Gb SFP+ (FPR-X-NM-8X10G)
• 8-port 1/10/25Gb SFP+ (FPR-X-NM-8X25G)
• 4-port 40-Gb QSFP/QSFP+ (FPR-X-NM-4X40G)
• 4-port 40/100/200-Gb QSFP28/QSFP (FPR-X-NM-4X200G)
200-Gb traffic is not supported until a later release.
Note
• 2-port 100-Gb QSFP56/QSFP28/QSFP (FPR-XNM-2X100G)
• 6-port 10-Gb SFP SR multimode hardware bypass (FPR-X-NM-6X10SRF)
• 6-port 10-Gb SFP LR single mode hardware bypass (FPR-X-NM-6X10LRF)
• 6-port 25-Gb SFP SR multimode hardware bypass (FPR-X-NM-6X25SRF)
• 6-port 25-Gb SFP LR single mode hardware bypass (FPR-X-NM-6X25LRF)
• 8-port copper 1-Gb 1000Base-T hardware bypass (FPR-X-NM-8X1GF)
Ships with two 1900 W AC power supplies
Ships with one 1900 W
AC power supply (second
Hot-swappable
power supply is optional)
Hot-swappable
Yes Yes
Note You must Note
order a
second
power
supply.
Three dual fan modules (hot-swappable)
Two Nonvolatile Memory Express (NVMe) SSD slots for EDSFF (Enterprise &
Datacenter SSD Form Factor) SSD drives
Ships with two 1.8-TB SSDs; factory-configured for RAID1.
Displays the serial number and a QR code that points to the Documentation Portal
Grounding pad on the left side of chassis near the rear power switch; use the
grounding lug kit that ships with the chassis.
On rear panel
Resets the system to factory default without requiring serial console access
Note The reset button is recessed. Press with a pin and hold longer than
5 seconds to set the system back to the factory default.
Cisco Secure Firewall 4200 Series Hardware Installation Guide
4245
Ships with two power supplies.
Features
3