Cisco 4200 Series Hardware Installation Manual page 25

Overview
Figure 11: 4-Port 200-Gb Network Module (FPR-X-NM-4X200G)
1 Captive screw
3 Power on LED
5 Ethernet 2/1 or 3/1
7 Ethernet 2/3 or 3/3
For More Information
• See 8-Port 1/10/25-Gb Network Module, on page 15
network module.
• See 8-Port 1000Base-T Network Module with Hardware Bypass, on page 22
the 8-port 10/100/1000Base-T network module.
• See Install, Remove, and Replace the Network Module, on page 63
and replacing network modules.
2 Network activity LEDs
The up arrows represent the top ports and the
down arrows represent the bottom ports.
• Off—No SFP.
• Amber—No link or a network failure.
• Green—Link is up.
• Green, flashing—Network activity.
4 Ejector handle
6 Ethernet 2/2 or 3/2
8 Ethernet 2/4 or 3/4
for a description of the 8-port 1/10/25-Gb
Cisco Secure Firewall 4200 Series Hardware Installation Guide
4-Port 200-Gb Network Module
for a description of
for the procedure for removing
21