Power Cord Specifications - Cisco 4200 Series Hardware Installation Manual

Power Cord Specifications

PID
FPR4K-XNM-2X100G
FPR4K-XNM-2X100G=
FPR4K-XNM-4X200G
FPR4K-XNM-4X200G=
FPR4200-NM-BLANK
FPR4200-NM-BLANK=

Power Cord Specifications

Each power supply has a separate power cord. Standard power cords or jumper power cords are available for
connection to the secure firewall. The jumper power cords for use in racks are available as an optional alternative
to the standard power cords.
If you do not order the optional power cord with the system, you are responsible for selecting the appropriate
power cord for the product. Using a incompatible power cord with this product may result in electrical safety
hazard. Orders delivered to Argentina, Brazil, and Japan must have the appropriate power cord ordered with
the system.
Note
The following power cords are supported.
Figure 19: Argentina
1
3
Cisco Secure Firewall 4200 Series Hardware Installation Guide
38
Only the approved power cords or jumper power cords provided with the Secure 4200 are supported.
PID: PWR-CAB-AC-ARG
Plug: IRAM 2073
Connector: IEC 60320/C21
Description
2-port 100-Gb QSFP+
2-port 100-Gb QSFP+ (spare)
4-port 40/100/200-Gb QSFP+
4-port 40/100/200-Gb QSFP+ (spare)
Network module blank slot cover
Network module blank slot cover (spare)
Part number: 37-1711-01
Cord set rating: 20 A, 250 V
2
Cord length: 14 ft (4.25 m)
Overview