Cisco 4200 Series Hardware Installation Manual page 16

Front Panel LEDs
Figure 6: Secure Firewall 4200 Front Panel LEDs
1 SSD-1 Status
Note
• Off—The SSD is not present.
• Green—The SSD is present; no activity.
• Green, flashing—The SSD is active.
• Amber—The SSD has a problem or failure.
3 Factory Reset Button Status
• Green, flashing—Flashes 5 seconds after
• Off—Reset is complete.
Note
Cisco Secure Firewall 4200 Series Hardware Installation Guide
12
The left LED is active. The right
LED is always off.
you depress the button.
The factory reset button begins
flashing after it has been depressed
for at least 5 seconds, and persists
until the software has completely
applied all factory default settings
or it is interrupted by a power cycle.
2 SSD-2 Status
The left LED is active. The right
Note
LED is always off.
• Off—The SSD is not present.
• Green—The SSD is present; no activity.
• Green, flashing—The SSD is active.
• Amber—The SSD has a problem or failure.
4 Fiber Port Link/Activity Status
Each fiber port has one dual color LED under the
SFP cage.
• Off—No SFP.
• Green—Link up.
• Green, flashing—Network activity at >1G
is detected.
• Amber—No link or network failure.
Overview