Breville All In One Manual page 10

6. Turn the motor off by releasing the trigger
switch.
7. Ensure the motor has completely stopped
before lifting the blender out of the jug.
8. When processing has finished remove the
power plug.
TO DETACH THE BLENDING LEG
Ensure the trigger switch is released and the
appliance is unplugged. Hold the motor body
with one hand, and using thumb and finger
of the other hand, press on the two EJECT
buttons on either side of the motor body.
Pull the motor body away from the blending
leg to detach.
RECOMMENDATIONS WHEN USING
AS AN IMMERSION BLENDER
• The immersion blender blends foods and
liquids rapidly, therefore it is easy to over
process. Remember when using the blending
leg to stop the immersion blender and check
food throughout the operation.
• Allow food to cool before blending.
• The stainless steel blending leg allows for hot
food to be processed directly in the saucepan.
This makes blending soups and sauces very
easy.
• For safety reasons remove saucepan away
from the heat before processing.
• Ensure the body of the appliance and power
cord are kept away from any
heat source.
• When puréeing and blending, cut food into
uniform sizes. This will ensure smooth and
consistent results.
10
BSB530XL_IB_C16.indd 10
• Warm all liquids to be added to soups and
purées, this will ensure even blending.
• Do not operate the appliance continuously
for more than 1 minute. Allow the motor to
rest for 1 minute between each use.
If food becomes lodged around the processing
blade or in the blade guard, follow the
following safety instructions:
1. Release the trigger switch to power off and
unplug the cord.
2. Use a spatula to carefully dislodge the food.
Do not use fingers as the blades are sharp.
3. After the food has been removed and blades
are clear, plug the appliance back into the
power supply and continue blending.
USING THE FOOD
PROCESSOR BOWL
Attaching gearbox to food processing
bowl lid
1. Place the gearbox into the food processor
lid, it will click into place.
7/11/2016 1:45 PM