Breville All In One Manual page 19

TO DISASSEMBLE THE
VARIABLE MASHING LEG
1. Ensure the motor is unplugged and
attached to the mashing leg. Remove the
mashing blade that is found under the base
of the leg by turning it clockwise.
2. Disassemble the gear box from motor body,
then turn the mashing leg to align and
remove the inner and outer legs from the
gear box together.
3. Lift the outer leg up to separate from the
inner leg.
Both of the legs can now be washed in hot
soapy water, then rinsed and dried thoroughly.
Alternatively, the mashing leg can be washed
in the dishwasher (TOP SHELF ONLY).
BSB530XL_IB_C16.indd 19
CAUTION
Do not use abrasive cleaners or steel wool.
NOTE
Mashing leg gear box is not dishwasher safe.
WHISK
Before cleaning remove the plug from the
power outlet. Remove the motor body from
the whisk and the gearbox from the whisk. The
whisk can be hand washed in hot soapy water,
rinsed and dried thoroughly after each use.
Alternatively, the whisk can also be washed in
the dishwasher. (TOP SHELF ONLY)
Do not use abrasive cleaners or steel wool.
Whisk gear box is not dishwasher safe.
STORAGE
Before storage remove the plug from the
power outlet. Ensure the appliance is clean and
completely dry.
Insert assembled S Blade™ and spindle into
the processing bowl, then place the reversible
shredder on the spindle. Align and lock the
processing bowl lid to the processing bowl
and place processing bowl onto the storage
unit with all of the accessories on the built in
accessory holders.
NOTE
The adjustable slicing disc is stored under
the food processing bowl, make sure that
the adjustable blade is set to STORAGE
POSITION.
19
7/11/2016 1:45 PM