Breville All In One Manual page 14

5. When processing has finished turn the
motor off by releasing the trigger switch
and remove the power plug.
6. Detach the motor from the gear box and
remove the lid from the bowl (refer to
instructions). Carefully remove the food
processing disc or S Blade™ and use a
spatula to remove any excess food from the
discs or blades and to remove processed
food from the bowl.
NOTE
When processing food through the feed
chute(s) you must keep pressing the trigger
switch in order to keep the motor on.
TO DETACH THE FOOD PROCESSING
BOWL AND LID
Ensure the trigger switch is released and the
appliance is unplugged.
Hold the motor body with one hand and using
thumb and finger of the other hand, press on
the two EJECT buttons on either side of the
motor body. Pull the motor body away from the
processing bowl gearbox to detach.
14
BSB530XL_IB_C16.indd 14
TO DETACH THE GEARBOX
FROM THE LID
Lift the gear box up from the processing
bowl lid.
RECOMMENDATIONS WHEN USING
THE IMMERSION BLENDER WITH
THE PROCESSING BOWL
• Do not operate the immersion blender when
the processing bowl is empty.
• The bottom of the processing bowl features
a anti-slip rubber rim around the bottom of
the bowl. This keeps the processing bowl
stable, however it is recommended during
processing to hold the motor body with one
hand and the processing bowl and lid with
the other.
• When processing, cut food into uniform sizes
to ensure quicker, even and more consistent
results.
• The immersion blender blends foods and
liquids rapidly, therefore it is easy to over
process. Remember to check food throughout
the operation.
CAUTION
• DO NOT process hard foods such as ice,
coffee, cereal or chocolate in lumps in the
processing bowl, as damage to the blades
may result.
• DO NOT process boiling or hot foods in the
processing bowl.
• NEVER remove the blades from the bowl
before processing is completed.
7/11/2016 1:45 PM