Table of Contents
Advertisement
For best results the main bowl is
recommended when chopping herbs.
To Use Your Plastic Blender
(if supplied)
Refer to Illustrations
IMPORTANT
Leaking will occur if the seal is damaged or
incorrectly fitted.
The appliance will not operate if the
blender is incorrectly fitted to the interlock.
1
Fit the sealing ring into the blade
assembly - ensuring the seal is located
correctly in the grooved area.
2
Hold the underside of the blade assembly
and insert the blades into the goblet - turn
anti-clockwise until it is secure. Refer to
the graphics on the underside of the blade
assembly as follows:
- Unlocked position
- Locked position
3
Put your ingredients into the goblet.
4
Fit the lid onto the goblet and turn clockwise
until it clicks. Fit the filler cap.
5
Place the blender onto the power unit, align
the
on the blender with the
power unit and turn clockwise to lock
Hints and Tips
When making mayonnaise, put all the
ingredients, except the oil, into the blender.
Remove the filler cap. Then, with the appliance
running, add the oil slowly through the hole in
the lid.
Thick mixtures, e.g. pâtés and dips, may need
scraping down. If the mixture is difficult to
process, add more liquid.
The processing of spices is not recommended
as they may damage the plastic parts.
To blend dry ingredients - cut into pieces,
remove the filler cap, then with the appliance
running, drop the pieces down one by one.
Keep your hand over the opening. For best
results empty regularly.
To Use Your Cutting Discs
(if supplied)
Refer to Illustrations
IMPORTANT
Never put your fingers in the feed tube.
1
Fit the drive shaft and bowl onto the power
unit.
M1
M6
-
on the
.
N1
N6
-
2
Holding by the centre grip, place the disc
onto the drive shaft with the appropriate side
uppermost.
3
Fit the lid.
4
Put the food in the feed tube.
5
Switch on and push down evenly with the
pusher.
Hints and Tips
Use fresh ingredients
Do not cut food too small. Fill the width of the
feed tube fairly full. This prevents the food from
slipping sideways during processing.
When slicing or grating: food placed
upright comes out shorter than food placed
horizontally.
There will always be a small amount of waste
on the disc or in the bowl after processing.
Attachment Storage
Refer to Illustration
After use the knife blade, emulsifying tool, dough
tool and 4mm slicing/grating disc can be stored
together in the bowl.
Do not operate the processor, with more
than one tool fitted in the bowl. Use only one
attachment at a time.
Cord Storage
Refer to Illustration
Insert the cord into the cord storage stuffer box.
Recipe
Prune Marinade
275g Honey (refrigerated)
25g Prunes
50ml Water
1
Place all ingredients into the mini chopper/
mill. Refrigerate overnight.
2
Fit the attachment to the power unit.
3
Switch to pulse for 5 seconds
4
Use as required.
Care and Cleaning
Always switch off and unplug before cleaning.
Handle the blade and cutting discs with care
- they are extremely sharp.
Some foods may discolour the plastic. This is
perfectly normal and will not harm the plastic
or affect the flavour of your food. Rub with a
cloth dipped in vegetable oil to remove the
discolouration.
6
P
Q
Advertisement
Table of Contents
