Kenwood MultiPro Go FDP22 - Food Processor & Meat Grinder Manual

Kenwood MultiPro Go FDP22 - Food Processor & Meat Grinder Manual

Advertisement

Kenwood MultiPro Go FDP22 - Food Processor & Meat Grinder Manual

Key

Key

  1. Pusher
  2. Feed tube
  3. Lid
  4. Knife blade
  5. Bowl
  6. Power unit
  7. Cord clip
  8. Grating/slicing disc
  9. Lid handle
  10. On/off switch + Pulse

Express Serve (if supplied)

  1. Slinger plate
  2. Food outlet
  3. Express Serve Bowl

To Use Your Food Processor Main bowl

Refer to Illustrations -

To Use Your Food Processor Main bowl - Part 1To Use Your Food Processor Main bowl - Part 2
To Use Your Food Processor Main bowl - Part 3

  • Your processor is not suitable for crushing or grinding coffee beans, or converting granulated sugar to caster sugar.
  • When adding almond essence or flavouring to mixtures avoid contact with the plastic as this may result in permanent marking.

information Hints & tips

  • Use the pulse (P) for short bursts. The pulse will operate for as long as the control is held in position.
  • Some foods may discolour the plastic. This is perfectly normal and will not harm the plastic or affect the flavour of your food. Rub with a cloth dipped in vegetable oil to remove the discolouration.

Knife Blade

  • Bread Dough - Place the dry ingredients in the bowl first and then add the liquid. Process until a smooth elastic ball of dough is formed.
  • Use the handle on the lid to support if the appliance starts to move on the worktop.
  • For coarser textures use the pulse control.
  • Take care not to over-process.
  • When making pastry use fat straight from the fridge cut into 2cm cubes.

Prune Marinade
300g Honey, 50g Prunes and 50ml Water.
Store in fridge overnight.
Process for 4 seconds using Pulse

Express Serve/Disc

Refer to Illustrations -

Express Serve/Disc

  • Use fresh ingredients
  • Do not cut food too small. Fill the width of the feed tube fairly full. This prevents the food from slipping sideways during processing.
  • There will always be a small amount of unprocessed food on the disc or in the bowl after processing.

Cord Adjustment

Refer to Illustration
Cord Adjustment

  • Wrap the cord around the base of the processor to the desired length and clip the cord together using the cord clip.

Storage

Storage
After use the knife blade and disc can be stored together in the bowl. Do not operate the processor, with both the knife blade and disc fitted. Use only one attachment at a time.

Service and Customer Care

  • If you experience any problems with the operation of your appliance, before requesting assistance refer to the 'Troubleshooting Guide' section in the manual or visit www.kenwoodworld.com.
  • Please note that your product is covered by a warranty, which complies with all legal provisions concerning any existing warranty and consumer rights in the country where the product was purchased.
  • If your Kenwood product malfunctions or you find any defects, please send it or bring it to an authorised KENWOOD Service Centre. To find up to date details of your nearest authorised KENWOOD Service centre visit www.kenwoodworld.com or the website specific to your Country.

Troubleshooting Guide

Problem Cause Solution
The processor will not operate. No Power. Check processor is plugged in.
Bowl not fitted to power unit correctly. The processor will not operate if the bowl or lid are not fitted correctly into the interlock.
Bowl lid not locked on correctly. Check that the bowl and lid are aligned and interlocked correctly.
Processor stops during processing. Processor overloaded/ maximum capacities exceeded. Check maximum capacities stated in the recommended usage chart.
Lid unlocked. Check lid is locked on correctly.
Can not fit the bowl to the base, with the lid fitted. The On/off switch is in the 'On' position. Move the switch to the 'off' position.
Food not exiting the outlet of the express serve. The slinger plate is not fitted under the grating/ slicing disc. Fit the slinger plate.
Slice or grated food damaged by the knife blade. Operating with the knife blade and disc fitted in the bowl. Remove the knife blade before using the grating/slicing disc.
Unit unstable/ heavy vibrations and movement.

Processing dough for too long.

Processor overloaded/ maximum capacities exceeded.

Use the handle on the lid to support if the appliance starts to move on the worktop. Do not process doughs for longer than 30 seconds and do not exceed maximum quantity recommended in the usage chart.
Re-kneading dough. Re-knead by hand only. Re-kneading in the bowl is not recommended as it may cause the processor to become unstable.
Sticky fruit/ingredients such as dates being processed. For best results use 'Pulse' first to break down the ingredients and then use continuous operation.
Heavy splashing or ingredients ejected from the feed tube. Pusher not fitted. Always fit the pusher when processing dough, pastry and cakes to prevent splashing from the feed tube.
Poor performance of the knife blade and disc. Refer to the Hints and tip section and follow the recommendation in the usage chart.

Safety

  • Read these instructions carefully and retain for future reference.
  • Before using for the first time, remove all packaging and any labels, including plastic blade covers. Wash the parts: see 'Cleaning'.
  • If the plug or cord is damaged it must, for safety reasons, be replaced by Kenwood or an authorised Kenwood repairer in order to avoid a hazard.
  • DO NOT touch the sharp blades. The blade and disc are very sharp, handle with care. Always hold by the finger grip at the top, away from the cutting edge, when handling the sharp cutting blades, emptying the bowl and during cleaning.
  • This appliance is not suitable for processing ice cubes.
  • Before lifting or carrying the appliance by the handle on the lid, always check that the bowl and lid are securely locked in place.
  • Ensure the cord is fully unwound before using the appliance.
  • DO NOT process hot ingredients.
  • Be careful if hot liquid is poured into the food processor bowl as it can be ejected out of the appliance due to sudden steaming.
  • Never leave the appliance unattended when it is operating.
  • Do not move appliance whilst in operation.
  • Do not exceed the maximum capacities stated in the recommended usage chart.
  • Do not operate your appliance for longer than 30 seconds when processing dough without a rest period. Processing continuously for longer periods can damage your appliance.
  • Always remove the knife blade before pouring contents from the bowl.
  • Keep hands and utensils out of the processor bowl whilst connected to the power supply.
  • If food needs to be pushed down use a suitable utensil such as a spatula.
  • Always switch off the appliance and disconnect from the supply if it is left unattended and before assembling, disassembling or cleaning.

  • Before removing the lid from the bowl wait until the attachment/blades have completely stopped.
  • Never use your fingers to push food down the feed tube. Always use the pusher supplied.
  • Do not use excessive force to push food down the feed tube – you could damage your appliance.
  • Do not use the lid lock to operate the processor, always use the on/off speed control.
  • Do not operate the processor with the both the knife blade and disc fitted. Use only one attachment at a time.
  • This appliance will be damaged and may cause injury if the interlock mechanism is subjected to excessive force.
  • Never use an unauthorised attachment.
  • Never use a damaged appliance. Get it checked or repaired: see 'Service and customer care'.
  • Never let the power unit, cord or plug get wet.
  • Do not let excess cord hang over the edge of a table or worktop or touch hot surfaces.
  • Children should be supervised to ensure that they do not play with the appliance.
  • This appliance shall not be used by children. Keep the appliance and its cord out of reach of children.
  • Appliances can be used by persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and if they understand the hazards involved.
  • Only use the appliance for its intended domestic use. Kenwood will not accept any liability if the appliance is subject to improper use, or failure to comply with these instructions.
  • Misuse of your processor can result in injury.

Express Serve

  • Avoid contact with moving parts. Keep fingers out of the food outlet opening.
  • Do not operate without the slinger plate fitted. If the slinger plate is not fitted food will clog under the plate and not exit the food outlet, resulting in damage to your attachment.
  • If the food is not exiting the food outlet, switch off and check that food is not clogging under the disc and the slinger plate is fitted. Clear any trapped food before continuing to process.
  • Do not run the Express Serve attachment continuously for longer than 2 minutes. Leave to cool for 2 minutes in between each 2 minute operation.

Cleaning

  • Always switch off and unplug before cleaning.
  • Wipe the power unit with a damp cloth, then dry. Ensure that the interlock area is clear of food debris.
  • Do not immerse the power unit in water.
  • Handle the blade and cutting discs with care - they are extremely sharp.

Before plugging in

  • Make sure your electricity supply is the same as the one shown on the underside of the power unit.


Plug and Fuse Information

  • The wires in the cord are coloured as follows: Blue = Neutral, Brown = Live.
  • If the plug is cut off it must be DESTROYED IMMEDIATELY. An electric shock hazard may arise if an unwanted non-rewireable plug is inadvertently inserted into a socket outlet.
  • If the plug supplied with your appliance has a fuse fitted and the fuse fails it must be replaced with one of the same rating.

warning Note:

  • For non-rewireable Plug Type G the fuse cover MUST be refitted when replacing the fuse. If the fuse cover is lost then the plug must not be used until a replacement can be obtained. The correct fuse cover is identified by colour and a replacement may be obtained from your Kenwood Authorised Repairer (see Service).


Plug Type G

  • This appliance conforms to EC Regulation 1935/2004 on materials and articles intended to come into contact with food.

Documents / Resources

References

Download manual

Here you can download full pdf version of manual, it may contain additional safety instructions, warranty information, FCC rules, etc.

Download Kenwood MultiPro Go FDP22 - Food Processor & Meat Grinder Manual

Advertisement

Need Assistance?

Do you have a question about the MultiPro Go that isn't answered in the manual? Leave your question here.

Error while submitting your question. Please, reload page and try again.

Thank you! Your question has been received!

Table of Contents