Table of Contents
Advertisement
Only use the appliance for its intended domestic use. Kenwood will not accept any liability
if the appliance is subject to improper use, or failure to comply with these instructions.
Misuse of your processor, blender or mill can result in injury.
The maximum rating is based on the mini chopper/mill attachment that draws the greatest
load. Other attachments may draw less power.
Blender
DO NOT process hot ingredients.
SCALD RISK: Hot ingredients must be allowed to cool to room temperature before
placing in the goblet or before blending.
Always take care when handling the blade assembly and avoid touching the cutting edge
of the blades when cleaning.
Only operate the blender with the lid in place.
Only use the goblet with the blade assembly supplied.
Never run the blender empty.
Smoothie recipes - never blend frozen ingredients that have formed a solid mass during
freezing, break it up before adding to the goblet.
Mill Attachments
Never fit the blade assembly to the power unit without the jar/lid fitted.
Never unscrew the jar/lid while the mill is fitted to your appliance.
Do not touch the sharp blades – Keep the blade assembly away from children.
Never remove the mill until the blades have completely stopped.
The appliance will not work if the mill is incorrectly fitted.
Do not process hot ingredients in the mill allow to cool down to room temperature before
processing.
Mini Chopper/Mill
The processing of spices is not recommended as they may damage the plastic parts.
Grinding Mill
Do not process dried turmeric root as it is too hard and may damage the blades.
Slicing/Grating Discs
The discs are very sharp; handle with care when fitting, removing and cleaning.
Always hold by the finger grip away from the cutting edge when handling the sharp
cutting blades, emptying the bowl and during cleaning.
Never use your fingers to push food down the feed tube. Only use the pusher supplied.
Before removing the lid, switch off wait until the cutting disc has completely stopped.
Cleaning
Switch off, wait for the blades to stop and unplug the blender before cleaning.
Wipe the power unit with a damp cloth, then dry. Ensure that the interlock area
of food debris.
The bowl, lid, pusher and all attachments/tools apart from the blender and mill blade
assemblies are suitable for both handwashing and dishwashing.
The blade assemblies should be brushed clean and rinsed under running water.
Do not immerse the power unit or blender/mill blade assemblies in water.
Before plugging in
Make sure your electricity supply is the same as the one shown on the underside of your appliance.
This appliance conforms to EC Regulation 1935/2004 on materials and articles intended to come into
contact with food.
Before using for the first time
1
Remove the plastic blade covers from the knife blade. Take care the blades are very sharp. These
covers should be discarded as they are to protect the blade during manufacture and transit only.
2
Wash the parts see 'Care and cleaning'.
3
is clear
Advertisement
Table of Contents
