Black & Decker PR100 Use And Care Manual page 29

Note: If you press START but the lid is not
correctly closed, the main screen will blink
OPEN . The unit will not heat on the pressure
settings unless the lid is properly closed .
Center the pressure release valve above
the seal position (
must be pointed down to properly seal the
pressure cooker before cooking . If the
pressure release valve has not been
aligned properly, pressure will not build up
and you may not achieve desired results .
Seal Position
6 . Plug in the pressure cooker to a wall
outlet . The LED display will flash ---- .
Once a function is selected (see Preset
Cooking Functions) a red light will
flash above the selected function
and a default time will appear on the
LED display . If the time needs to be
adjusted, press the + or – buttons to
select the correct time . Then press the
START button .
Note: If you already know the proper cook
times, the manual function allows you
to easily choose any time based on your
cooking needs . The timer will automatically
default to 30 min but can be adjusted
using the instructions above . For general
cook time guidelines, see the preset
function section for information .
) on the lid . The valve
7 . Once the START button has been
pressed, the red light above the
selected function will turn solid and
the pressure cooker will begin to
build pressure . The amount of time
to build pressure will depend on the
amount of liquid and food inside the
cooking bowl .
8 . As pressure builds, the LED display
will show building dashes that will
blink until the desired pressure has
been reached .
Once up to pressure, the pressure
cooker will beep and the timer will
start . This is also indicated by the red
float valve in the elevated position .
Not
Pressurized
Note: Never attempt to open the lid while
pressure cooking . If you must open the lid
while pressure cooking, press the STOP
button
29
Pressurized