Display And Icons - Smeg BPW1260 User Manual

The screens shown below mainly refer to the layout of model BPW1260. The same
remarks and procedures also apply for the other models covered by the manual, unless
otherwise specified.
9.3

DISPLAY AND ICONS

The central display consists of two main lines, which show program and machine parameter information, and
a series of icons used for information about the cycle in progress and the status of the device.
All the icons appear for a few seconds when the device is switched on, to enable an immediate check that
the display is working correctly.
ICON MEANING – With cycle preselected
TD icon: illuminates if cycle includes a
thermal disinfection phase.
Clostridium treatment icon: illuminates if
cycle includes a Clostridium treatment
phase.
Eco icon: illuminates if cycle is designed for
maximum energy efficiency.
Service Icon: illuminates if program is for
service purposes.
A
0
of the display shows the A
the cycle.
Clock icon: combined with the display
below,
time/cycle.
User Manual
icon: illuminates when the second line
it shows the
193909105 rev.02
MEANING – With cycle running
With program in running: icon on (not
flashing) during thermal disinfection
phases.
With program running: icon on (not
flashing).
With program running: icon on (not
flashing).
With program running: icon on (not
flashing).
With program running:
target value for
0
remains on (not flashing) when the second
line shows the value of parameter A
Once on: remains on (not flashing) until
the end of the phase.
The icon is only shown (not flashing) when
the second line of the display contains the
programmed
time remaining for the program in
progress.
BPW1260
.
0
Page 42 – 93